Recurring Syntax Elements - IBM System Storage DS3000 Programming Manual

Table 2-4. Recurring Syntax Elements (continued)
Recurring Syntax
esm-spec
hex-literal
subsystem-number
filename
error-action
drive-channel-identifier
drive-channel-identifier-list
host-channel-identifier
drive-type
drive-media-type
8
feature-identifier
repository-spec
2-6
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Syntax Value
enclosureID, (left|right)
0xhexadecimal-literal
integer-literal
string-literal
(stop | continue)
(1 | 2 | 3 | 4 | 5 | 6 |7 | 8)
Note: You might not be able to use all the
supported values, depending on your storage
subsystem model.
drive-channel-identifier
{drive-channel-identifier}
(a1 | a2 | a3 | a4 | a5 | a6 | a7 | a8
|b1 | b2 | b3 | b4 | b5 | b6 | b7 | b8)
Note: You might not be able to use all the
supported values, depending on your storage
subsystem model.
(fibre | SATA | SAS)
(HDD | SSD | unknown| allMedia)
HDD means hard disk drive. SSD means solid
state disk.
VolumeCopy | mixedDriveTypes |
highPerformanceTier | SSDSupport |
storagePartition | flashcopy |
enhancedFlashCopyImage | driveSlotLimit |
FullDiskEncryption | ExternalKeyManager |
T10PI)
To use the High Performance Tier premium
feature, you must configure a storage subsystem
as one of these:
v SHIPPED_ENABLED
v SHIPPED_ENABLED=FALSE;
KEY_ENABLED=TRUE
instance-based-repository-spec |
count-based-repository-spec