Chapter 14. Deprecated Commands And Parameters; Deprecated Commands; Deprecated Parameters - IBM System Storage DS3000 Programming Manual

Chapter 14. Deprecated Commands and Parameters

This appendix lists the commands, command formats, and parameters that are no longer supported by
this level of software. The information is presented in two tables. "Deprecated Commands" lists
commands no longer supported in this level of software and the new commands that replaced them.
"Deprecated Parameters" lists the parameters no longer supported in this level of software and the new
parameters that replaced them.

Deprecated Commands

Table 14-1. Deprecated Commands
Deprecated Command
start rollback (volume
[flashcopyVolumeName | volumes
[flashcopyVolumeName1 ...
flashcopyVolumeNamen])

Deprecated Parameters

Table 14-2. Deprecated Parameters
Old Syntax
copyType=(online | offline)
© Copyright IBM Corp. 2008, 2012
New Command
start (volume [flashcopyVolumeName |
volumes [flashcopyVolumeName1 ...
flashcopyVolumeNamen]) rollback
The order of the terms in the syntax is
changed to be consistent with other
commands.
New Syntax
This parameter is removed from these
commands:
v recopy volumeCopy
v remove volumeCopy
v set volumeCopy
14-1