Deactivate Enhanced Global Mirroring; Deactivate Enhanced Remote Mirroring; Delete Subsystem - IBM System Storage DS3000 Programming Manual

Syntax
deactivate storageSubsystem feature=remoteMirror
Parameters
None.

Deactivate Enhanced Global Mirroring

This command deactivates the Enhanced Global Mirroring premium feature.
Syntax
Note: All existing Enhanced Global Mirror Groups or Enhanced Global Mirrored pairs must be deleted
from the local storage subsystem and the remote storage subsystem before the Enhanced Global
Mirroring feature can be deactivated.
deactivate storageArray feature=enhancedGlobalMirror
Parameters
None

Deactivate Enhanced Remote Mirroring

This command deactivates the Enhanced Remote Mirroring premium feature, disassembles the mirror
repository logical drive, and releases the controller owner of the secondary logical drive. The controller
host port that is dedicated to the secondary logical drive is available for host data transfers.
Syntax
deactivate storagesubsystem feature=syncMirror
Note: In previous versions of this command the feature identifier was remoteMirror. This feature
identifier is no longer valid and is replaced by syncMirror.
Parameters
None

Delete subsystem

This command deletes an entire subsystem and its associated logical drives.
Attention: Possible damage to the storage subsystem configuration – All of the data in the subsystem
is lost as soon as you run this command.
Syntax
delete subsystem [subsystemName]
Parameter
Parameter
subsystem
3-108
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Description
The alphanumeric identifier (including - and _) of the
subsystem that you want to delete. Enclose the
subsystem identifier in square brackets ([ ]).