Delete Consistency Group Enhanced Flashcopy Image - IBM System Storage DS3000 Programming Manual

Parameter
Parameter
cgEnhancedFlashCopyLogicalDrive
deleteRepositoryMembers

Delete Consistency Group Enhanced FlashCopy Image

This command deletes the Enhanced FlashCopy images in a consistency group.
Syntax
delete cgEnhancedFlashCopyImage consistencyGroup="consistencyGroupName"
[(deleteCount=numberOfEnhancedFlashCopyImages |
retainCount=numberOfEnhancedFlashCopyImages) |
ignoreEnhancedFlashCopyLogicalDrive=(TRUE | FALSE)
Parameters
Parameter
consistencyGroup
deleteCount
retainCount
ignoreEnhancedFlashCopyLogicalDrive
3-110
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Description
The name of the consistency group Enhanced FlashCopy
logical drive that you want to delete. Enclose the name
of the consistency group Enhanced FlashCopy logical
drive in double quotation marks (" ") inside square
brackets ([ ]).
The parameter to save or delete the member logical
drives. To save the member logical drives, set this
parameter to TRUE. To delete the member logical drives,
set this parameter to FALSE. The default value is TRUE.
Description
The name of the consistency group from which you want
to delete the Enhanced FlashCopy images. Enclose the
consistency group name in double quotation marks (" ").
The number of Enhanced FlashCopy images that you
want to delete from the consistency group. Use integer
values.
This parameter deletes the oldest Enhanced FlashCopy
image first and continues to delete the oldest Enhanced
FlashCopy images until reaching the number that you
enter.
The number of Enhanced FlashCopy images that you
want to keep in the consistency group. Use integer
values.
This parameter keeps the most recent Enhanced
FlashCopy images in the consistency group.
Use this parameter to make sure that you do not delete
an Enhanced FlashCopy image that has an Enhanced
FlashCopy logical drive associated with the Enhanced
FlashCopy image. You can use one of these values:
v TRUE - Use this value to delete the Enhanced
FlashCopy image even though the Enhanced
FlashCopy image has an associated Enhanced
FlashCopy logical drive.
v FALSE - This value will cause the command to
terminate when the Enhanced FlashCopy image has an
associated Enhanced FlashCopy logical drive.
The default value is TRUE.