IBM System Storage DS3000 Programming Manual page 305

Show Enhanced FlashCopy Group
This command returns this information about one or more Enhanced FlashCopy groups.
Syntax
show (allEnhancedFlashCopyGroups | enhancedFlashCopyGroup [
enhancedFlashCopyGroupName] | enhancedFlashCopyGroups
[enhancedFlashCopyGroupName1 ... enhancedFlashCopyGroupNamen])
[summary | schedule]
Parameters
Parameter
allEnhancedFlashCopyGroups
enhancedFlashCopyGroup or enhancedFlashCopyGroups
summary
schedule
Notes
This command returns Enhanced FlashCopy group information as shown in this example:
FLASHCOPY GROUP DETAILS
FLASHCOPY GROUPS-----------------------------
SUMMARY
Total Enhanced FlashCopy Groups: 1
Total Enhanced FlashCopy Images: 0
Enabled Enhanced FlashCopy Image Schedules: 0
Status: 1 Optimal, 0 Non Optimal
Name Type Status
2_SG_01 Standard Optimal
Total Repository Capacity Available Repository
Capacity Enhanced FlashCopy Image Limit
10.318 GB
Enhanced FlashCopy Images
0
DETAILS
Enhanced FlashCopy Group "2_SG_01"
Associated Base Logical drive
2
10.318 GB (100%)
Scheduled
No
Description
The parameter to return information about all of the
Enhanced FlashCopy groups in the storage subsystem.
The name of the specific Enhanced FlashCopy group for
which you are retrieving information. Enclose the
Enhanced FlashCopy group name in square brackets
([ ]).
If you enter more than one Enhanced FlashCopy group
name, separate each name with a space. Enclose all of
the Enhanced FlashCopy group names in only one set of
double quotation marks (" ").
The parameter to return a concise list of information
about the Enhanced FlashCopy groups.
The parameter to return a concise list of information
about the schedules for the Enhanced FlashCopy group
copy operations.
0
Chapter 3. Script Commands
3-259