IBM System Storage DS3000 Programming Manual page 68

Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
Set Host
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Host Channel
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Host Group
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Host Port
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Set iSCSI Initiator
DS3000: 6.50.xx.xx
DS4000: Not supported
DS5000: 7.6x.xx.xx
Set iSCSI Target Properties
DS3000: 6.50.xx.xx
DS4000: Not supported
DS5000: 7.6x.xx.xx
Set Logical Drive or Set Logical Drive Attributes
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx
Note:
v 7.1.xx.xx adds the preReadRedundancyCheck parameter.
v For version 7.60.xx.xx, you can change the addDrive parameter to accommodate the enclosures
with internal disk drawers.
Set Logical Drive Attributes for a Disk Pool
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Set Logical Drive Mapping
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
3-22
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide