IBM System Storage DS3000 Programming Manual page 613

1 Optimal 5,120.000
GB 10 6 13
2 Optimal 1.000
GB 1 Volume-Group-2 14
3 Optimal 10.000
GB 1 Volume-Group-2 15
4 Optimal 3.000
GB 1 Volume-Group-2 16
Unnamed Optimal 100.004
MB 0 Volume-Group-1 0
DETAILS
Volume name:
Volume status:
Capacity: 5,120.000 GB
Volume world-wide
identifier: 60:0a:0b:80:00:29:ed:12:00:00
Subsystem ID (SSID):
Associated Array:
RAID level: 10
LUN: 13
Accessible By:
Media type: Hard Disk Drive
Interface type:
Enclosure loss protection:
Secure:
Preferred owner:
Current owner:
Segment size:
Capacity reserved for future
segment size changes:
Maximum future segment size:
Modification priority:
Read cache: Enabled
Write cache:
Write cache without batteries:
Write cache with mirroring:
Flush write cache after (in seconds): 10.00
Dynamic cache read prefetch:
Enable background media scan:
Media scan with redundancy check: Disabled
Pre-Read redundancy check:
Volume name:
Volume status: Optimal
Capacity: 1.000 GB
Volume world-wide identifier:
Subsystem ID (SSID):
Associated Array: Volume-Group-2
RAID level: 1
LUN: 14
Accessible By:
Media type: Hard Disk Drive
Interface type:
Enclosure loss protection:
Secure: No
Preferred owner:
Current owner:
Segment size:
Capacity reserved for future
segment size changes:
Maximum future segment size:
Modification priority:
Read cache: Enabled
Write cache:
Write cache without batteries:
Write cache with mirroring:
Flush write cache after
(in seconds):
1
Optimal
14
6
Default Group
Serial ATA (SATA)
Yes
No
Controller in slot A
Controller in slot A
128 KB
Yes
2,048 KB
High
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
2
60:0a:0b:80:00:29:ed:12:00:00
15
Default Group
Fibre Channel
Yes
Controller in slot B
Controller in slot B
128 KB
Yes
2,048 KB
High
Enabled
Disabled
Enabled
10.00
Appendix A. Examples of information returned by the show commands
A-17