Tools Required - ABB DriveIT ACH550-01 User Manual

ACH550 User's Manual

Tools required

To install the ACH550 you need the following:
• Screwdrivers (as appropriate for the mounting hardware
used)
• Wire stripper
• Tape measure
• Drill
• Mounting hardware: screws or nuts and bolts, four each. The
type of hardware depends on the mounting surface and the
frame size:
Frame
size
IP 21 / IP 54
R1 6.5 / 8.4
R2 9.0 / 11.5
R3 16.0 / 18.1
R4 24.0 / 26.6
R5 34.0 / 42.0
R6 69.0 / 86.0
Note! Do not attempt to lift frame size R6 without a lifting aid.
Preparing for installation
Frame Frame
weight weight
kg lb.
IP 21 / IP 54
14.3 / 18.6
19.8 / 25.4
35.0 / 40.0
53.0 / 58.7
75.0 / 93.0
152/190
Mounting Mounting
hardware hardware
Metric Imperial
units units
M5 #10
M5 #10
M5 #10
M5 #10
M6 1/4 in
M8 5/16 in
35