ABB DriveIT ACH550-01 User Manual page 256

Code Description
3402 SIGNAL1 MIN
Defines the minimum expected value for the first display parameter.
Use parameters 3402, 3403, 3406, and 3407, for example to convert
a Group 01 parameter, such as 0102
conveyor driven by the motor (in ft/min). For such a conversion, the
source values in the figure are the min. and max. motor speed, and
the display values are the corresponding min. and max. conveyor
speed. Use parameter 3405 to select the proper units for the display.
Note! Selecting units does not convert values.
Display
Value
P 3407
P 3406
3403 SIGNAL1 MAX
Defines the maximum expected value for the first display parameter.
3404 OUTPUT1 DSP FORM
Defines the decimal point location for the first display parameter.
• Enter the number of digits desired to the right of the decimal point.
• See table for example using pi (3.14159).
3404 Value
3405 OUTPUT1 DSP UNIT
Selects the units used with the first display parameter.
252
P3402
Display
0 + 3
1 + 3.1
2 + 3.14
3 + 3.142
4 3
5 3.1
6 3.14
7 3.142
8 Bar meter displayed.
ACH550 User's Manual
(in rpm) to the speed of a
SPEED
P 3403
Source Value
Range
-32768...+32767
(Signed)
0...65535
(Unsigned)
Parameter listing and descriptions
Range
-
-
0...8
0...127