ABB DriveIT ACH550-01 User Manual page 414

Applicable standards
The drive complies with the following standards. The compliance
with the European Low Voltage Directive is verified according to
standards EN 50178 and EN 60204-1.
EN 50178 (1997) Electronic requirement for use in power
EN60204-1
(1997)
EN 60529: 1991
(IEC 529), IEC
60664-1 (1992)
EN 61800-3
(1996) +
Amendment A11
(2000)
UL 508C
410
Applicable standards
installations.
Safety of machinery. Electrical equipment
of machines. Part 1: General
requirements.Provisions for compliance:
The final assembler of the machine is
responsible for installing:
• An emergency-stop device
• A supply disconnecting device
Degrees of protection provided by
enclosures (IP code)
EMC product standard including specific
test methods
UL standard for Safety, Power Conversion
Equipment, second edition
Appendix and available options
ACH550 User's Manual