Creating A Timer - ABB DriveIT ACH550-01 User Manual

ACH550 User's Manual

3. Creating a timer

Different time periods can be collected in a timer and connected
to parameters. The timer can act as the source of start/stop and
change direction commands, constant speed selection and relay
activation signals. Time periods can be in multiple timed
functions but a parameter can only be connected to a single
timer. It is possible to create up to four timers.
To create a timer, follow these steps:
Select MENU to
enter the main
menu.
1
Select
PARAMETERS
2 mode with the Up/
Down buttons.
Then Select
ENTER to enter
the Parameters
mode.
Scroll to group 36
TIMED
3 FUNCTIONS with
the Up/Down
buttons and
select SEL.
Scroll to TIMER 1
with the Up/Down
buttons and
4 select EDIT.
Real-time clock and timer functions 121