ABB DriveIT ACH550-01 User Manual page 66

Select SAVE to
store the
modified value
or select
6 CANCEL to
leave the set
mode. Any
modifications
not saved are
cancelled.
Select EXIT to
return to the
listing of
7 parameter
groups, and
again to return
to the main
menu.
To complete the control connections by manually entering the
parameters, see section "Parameter listing and descriptions".
For detailed hardware description, see the Appendix.
Note! The current parameter value appears below the
highlighted parameter.
Note! To view the default parameter value, press the UP/DOWN
buttons simultaneously.
Note! The most typical and necessary parameters to change are
parameter groups 99 Start-up data, 10 Start/Stop/Dir, 11
Reference Select, 20 Limits, 21 Start/Stop, 22 Accel/Decel, 26
Motor control and 30 Fault functions.
Note! To restore the default factory settings, select the
application macro HVAC default.
62
ACH550 User's Manual
Start-up & control panel