ABB DriveIT ACH550-01 User Manual page 265

ACH550 User's Manual
A parameter can be connected to only one timer
Timer1
3626 Timer1 Src
Timer2
3627 Timer2 Src
Code Description
3601 TIMERS ENABLE
Selects the source for the timer enable signal.
0=
NOT SEL
1=DI1- Defines digital input DI1 as the timed function enable
signal.
• The digital input must be activated for timed functions enable.
2...6=DI2...DI6- Defines digital input DI2...DI6 as the timed
function enable signal.
7=
ACTIVE
-1=DI1(INV) - Defines an inverted digital input DI1 as the timed
function enable signal.
• This digital input must be de-activated for timed function
enable.
-2...-6=DI2(INV)...DI6(INV) - Defines an inverted digital input
DI2...DI6 as the timed function enable signal.
Parameter listing and descriptions
1001 1
EXT
1002 2
EXT
1102 1/2
EXT
1201
CONST SPEED SEL
1401
RELAY OUTPUT
1410
RELAY OUTPUT
4027
PID PARAM SET
8126
TIMED AUTOCHANGE
- Timed functions are disabled.
- Timed functions are enabled.
COMMANDS
COMMANDS
SEL
1...1403
RELAY OUTPUT
4...1412
RELAY OUTPUT
Range
-6...7
3
6
261