ABB DriveIT ACH550-01 User Manual page 135

ACH550 User's Manual
The following figure shows the ACH550 fieldbus control.
Fieldbus
Adapter
Std Serial link
RS 485
When using serial communication, the ACH550 can either:
• Receive all of its control information from the fieldbus, or
• Be controlled from some combination of fieldbus control and
other available control locations, such as digital or analog
inputs, and the control panel.
Serial communications
Other
Devices
Slot 2
Either a plug-in fieldbus adapter
X1:28...32 module or the standard serial RS485
interface can be used at a time
Data flow
Control word
reference
Status word
Actual values
Parameter R/W Requests/Responses
Fieldbus controller
Process
I/O
(cyclic)
Service
messages
(Acyclic)
131