ABB DriveIT ACH550-01 User Manual page 210

Code Description
1508 AO2 CONTENT MIN
Sets the minimum content value. See
1509 AO2 CONTENT MAX
Sets the maximum content value. See
1510 MINIMUM AO2
Sets the minimum output current. See
1511 MAXIMUM AO2
Sets the maximum output current. See
1512 FILTER AO2
Defines the filter time constant for AO2. See
Group 16: System Controls
This group defines a variety of system level locks, resets and enables
Code Description
1601 RUN ENABLE
Selects the source of the run enable signal.
0 = NOT SEL – Allows the drive to start without an external run
enable signal.
1 = 1 – Defines digital input
DI
• This digital input must be activated for run enable.
• If the voltage drops and de-activates this digital input, the drive
will coast to stop and not start until the run enable signal
resumes.
2...6 =
DI
signal.
• See
7 =
COMM
the run enable signal.
• Bit 6 of the Command Word 1 (parameter 0301) activates the run
disable signal.
• See fieldbus user's manual for detailed instructions.
-1 = 1(
DI
signal.
• This digital input must be de-activated for run enable.
• If this digital input activates, the drive will coast to stop and not
start until the run enable signal resumes.
-2...-6 =
as the run enable signal.
• See
206
2... 6 – Defines digital input
DI
1 above.
DI
– Assigns the fieldbus Command Word as the source for
) – Defines an inverted digital input
INV
2( )... 6( ) – Defines an inverted digital input
DI INV DI INV
1( ) above.
DI INV
ACH550 User's Manual
1
AO CONTENT MIN
1
AO CONTENT MAX
MINIMUM AO
MAXIMUM AO
FILTER AO
Range
0...7, -1...-6
1 as the run enable signal.
DI
2... 6 as the run enable
DI DI
DI
Parameter listing and descriptions
Range
-
above.
-
above.
0...20.0 mA
1 above.
0...20.0 mA
1 above.
0...10 s
1 above.
1 as the run enable
2...
DI
.
6
DI