ABB DriveIT ACH550-01 User Manual page 156

Bit Name
10 ABOVE_LIMIT
11 EXT CTRL LOC
12 EXT RUN
ENABLE
13
...
15
152
STATUS WORD
Val Description (Correspond to states/boxes
ue in the state diagram)
1 The value of the supervised parameter
equals to or is greater than supervision high
limit. This bit remains '1' until the value of the
supervised parameter has dropped below
the supervision low limit.Refer to Group 32:
Supervision.
0 The value of first supervised parameter is
below supervision low limit. This bit remains
'0' until the value of the supervised
parameter exceeds the supervision high
limit. Refer to Group 32: Supervision.
1 External control location 2 (
0 External control location 1 (
1 Run Enable signal received
0 No Run Enable signal received
Reserved
ACH550 User's Manual
2) selected
EXT
1) selected
EXT
Serial communications