ABB DriveIT ACH550-01 User Manual page 290

Code Description
5131 FBA STATUS
Contains the status of the adapter module.
0 =
IDLE
1 =
EXEC
2 =
TIME OUT
between the adapter and the drive.
3 =
CONFIG ERROR
• The major or minor revision code of the adapter's CPI firmware
revision differs from that stated in the drive's configuration file.
4 =
OFF
5 =
ON
6 =
RESET
5132 FBA CPI FW REV
Contains the revision of the module's CPI program. Format is xyz
where:
• x = major revision number
• y = minor revision number
• z = correction number
Example: 107 = revision 1.07
5133 FBA APPL FW REV
Contains the revision of the module's application program Format
is xyz where:
• x = major revision number
• y = minor revision number
• z = correction number
Example: 107 = revision 1.07
286
– Adapter not configured.
. – Adapter is initializing.
INIT
– A timeout has occurred in the communication
– Adapter configuration error.
- – Adapter is off-line.
LINE
- – Adapter is on-line.
LINE
– Adapter is performing a hardware reset.
ACH550 User's Manual
Range
0...6
0...0xFFFF
0...0xFFFF
Parameter listing and descriptions