ABB DriveIT ACH550-01 User Manual page 179

ACH550 User's Manual
Code Description
0132 PID 1 DEVIATION
The difference between the
controller reference value
and actual value.
• Units and scale defined by PID parameters.
0133 PID 2 DEVIATION
The difference between the
2 controller reference value and actual value.
PID
• Units and scale defined by PID parameters.
0134 COMM RO WORD
Free data location that can be written from serial link.
• Used for relay output control.
• See parameter 1401.
0135 COMM VALUE 1
Free data location that can be written from serial link.
0136 COMM VALUE 2
Free data location that can be written from serial link.
0137 PROCESS VAR 1
Process variable 1
• Defined by parameters in Group 34: Panel Display / Process
Variables.
0138 PROCESS VAR 2
Process variable 2
• Defined by parameters in Group 34: Panel Display / Process
Variables.
0139 PROCESS VAR 3
Process variable 3
• Defined by parameters in Group 34: Panel Display / Process
Variables.
0140 RUN TIME
The drive's accumulated running time in thousands of hours (kh).
0141 MWH COUNTER
The drive's accumulated power consumption in megawatt hours. Can
not be reset.
0142 REVOLUTION CNTR
The motor's accumulated revolutions in millions of revolutions.
Parameter listing and descriptions
Range
Unit and scale defined
1 by par.4006/4106 and
PID
4007/4107
Unit and scale defined
by par. 4206 and 4207
0...65535
-32768...+32767
-32768...+32767
-
-
-
0...499.99 kh
0...9999 MWh
0...9999
175