ABB DriveIT ACH550-01 User Manual page 139

ACH550 User's Manual
Code Description
5101 FBA TYPE
Displays the type of the connected fieldbus adapter module.
0 = Module not found or not connected. Check the fieldbus User's
Manual chapter "Mechanical Installation" and check that
parameter 9802 is set to 4 = EXT FBA.
1 =
PROFIBUS
16 =
INTERBUS
21 =
LONWORKS
32 =
CANOPEN
37 =
DEVICENET
64 =
MODBUS PLUS
101 =
CONTROLNET
128 =
ETHERNET
5102... FB PAR 2...FB PAR 26
5126
Refer to communication module documentation for more
information on these parameters.
5127 FBA PAR REFRESH
Validates any changed fieldbus parameter settings.
• After refreshing, the value reverts automatically to DONE.
5128 FILE CPI FW REV
Displays the CPI firmware revision of the drive's fieldbus adapter
configuration file. Format is xyz where:
• x = major revision number
• y = minor revision number
• z = correction number
Example: 107 = revision 1.07
5129 FILE CONFIG ID
Displays the revision of the drive's fieldbus adapter module's
configuration file identification.
• File configuration information is drive application program-
dependent.
5130 FILE CONFIG REV
Contains the revision of the drive's fieldbus adapter module
configuration file.
Example: 1 = revision 1
Serial communications
- –
DP
–
–
–
–
–
–
–
Range
0...65535
0=DONE, 1=REFRESH
0...0xFFFF
0...0xFFFF
0...0xFFFF
135