Table of Contents
Advertisement
DMP Plus Series C V / C V AT – Patton POTS
3.6 System Overview
The Home tab is used to view a summary of Line configuration and call status.
In the example below, Line 1 has a configuration but shows as not registered.
interface will not show as
Appearance-specific (caller-specific) details for active calls can be accessed by clicking on the
corresponding Line entry.
VoIP Dialer in DSP Configurator Software will not work since the line does not register to a call
server.
3.7 Troubleshooting
In the event of a problem, review the following:
• Verify the correct port is used on the DMP Plus
o LAN 2 is used in the example above
Figure 7 DMP 64 PLUS C V AT - Rear
• Verify the IP addresses have been configured properly
o DMP Plus LAN2:
o Patton POTS Interface:
registered.
192.168.1.254
192.168.1.253
Revision Date:
10/16/2020
The Patton POTS
Page 20 of 28
Advertisement
Table of Contents
Need help?
Do you have a question about the DMP Plus Series and is the answer not in the manual?
Questions and answers