A5 Power Supply; Removal - Agilent Technologies PSA Series Service Manual

A5 Power Supply

Use ESD precautions when performing this replacement procedure.
CAUTION

Removal

1. Remove the instrument top brace. Refer to the
2. Refer to
3. Carefully pull up on the power supply assembly to disengage from
Figure 11-37 Power Supply Removal
Chapter 11
procedure.
Figure 11-37. Using the T-10 driver, remove the 5 screws
(1) securing the A5 power supply assembly (2) to the deck and the
rear frame.
the motherboard connector.
Assembly Replacement Procedures

A5 Power Supply

"Top Brace" removal
361