Agilent Technologies PSA Series Service Manual page 261

Reference Description
Designator
W7 W7 Cable, semi-rigid (with ferrites), For standard "N" type RF
Input to A14 Attenuator
W8 W8 Cable, semi-rigid (with ferrites), A14 attenuator to A15
attenuator
W9 W9 Cable, semi-rigid, A15 Attenuator to A19 RYTHM
W15 W15 Cable, semi-rigid, A9 2nd LO, J10 to Lowband, J5
W17 W17 Cable (10), coax (with ferrites), A19 RYTHM highband
output to A10 3rd Converter J1
W18 W18 Cable (7), coax (with ferrites), 321.4 MHz A20 Lowband
assy to A10 3rd Converter J2
W20 W20 Cable (50), coax, 50 MHz Cal signal from A10 3rd
Converter J7 to A14 Attenuator
W24 W24 Cable, semi-rigid, A21 SLODA to A12 Synthesizer
W35 W35 Cable, semi-rigid, YTO Output A18 YTO to A21 SLODA
W36 W36 Cable, semi-rigid, A19 RYTHM to FL1 Low Pass Filter
(except Option B7J)
W37 W37 Cable, semi-rigid, FL1 Low Pass Filter to A20 Lowband
Assy. J1 (except Option 1DS)
W38 W38 Cable, semi-rigid, LO signal A21 SLODA to A19 RYTHM
W39 W39 Cable, semi-rigid, Bandpass Filter Output, 3.9 MHz
Bandpass Filter to A20 Lowband J4
W40 W40 Cable, semi-rigid, Bandpass Filter Input, A20 Lowband J3
to FL2, 3.9 MHz Bandpass
W41 W41 Cable, semi-rigid, A21 SLODA to A20 Lowband Assy.
Chapter 10
Replaceable Parts Lists and Locations
Hardware
Agilent Part
Number
E4440-20067
E4440-20068
E4440-20069
E4440-20084
E4440-60371
E4440-60372
8121-0156
E4440-20082
E4440-20083
E4440-20071
E4440-20074
E4440-20070
E4440-20081
E4440-20080
E4440-20076
261