Replacement - Agilent Technologies PSA Series Service Manual

Replacement

Replacement DRAM and Flash boards are packaged with replacement
NOTE
standoffs.
1. Install the new standoffs.
2. To replace the DRAM or Flash boards, align the connectors and pins
3. Replace the A26 assembly. Refer to the
4. Replace the instrument top brace. Refer to the
Chapter 11
of the board over the holes and press down to seat the board.
replacement procedure.
replacement procedure.
Assembly Replacement Procedures
A26A1 DRAM and A26A2 Flash Boards
"A26 CPU Assembly"
"Top Brace"
389