Agilent Technologies PSA Series Service Manual page 283

Reference Description
Designator
W1 W1 Cable (5), coax, Front Panel External Trigger to A8 Analog
IF Assy. P1
W10 W10 Cable (8), coax, 7.5 MHz from A8 Analog IF P2, to A7
Digital IF, P1
W11 W11 Cable (3), coax, 21.4 MHz from A10 3rd Converter J5 to A8
Analog IF, J13
W12 W12 Cable (6), coax, TRIGGER IN from rear panel to A8
Analog IF, P4
W13 W13 Cable (20), coax, TRIGGER 1 OUT to A9 2nd LO, J12
W14 W14 Cable (30), coax, TRIGGER 2 OUT to A9 2nd LO, J11
W15 W15 Cable, semi-rigid, A9 2nd LO, J10 to Lowband, J5
W16 W16 Cable (4), coax, 600 MHz from A11 Reference board P3 to
A9 2nd LO, J1
W17 W17 Cable (10), coax (with ferrites), A19 RYTHM highband
output to A10 3rd Converter J1
W18 W18 Cable (7), coax (with ferrites), 321.4 MHz A20 Lowband
assy to A10 3rd Converter J2
W19 W19 Cable (40), coax 321.4 MHz IF OUT from A10 3rd
Converter J4 to rear panel
W20 W20 Cable (50), coax, 50 MHz Cal signal from A10 3rd
Converter J7 to A14 Attenuator
W21 W21 Cable (90), coax, 10 MHz Out from A11 Reference Assy P2
to rear panel
W22 W22 Cable (70), coax, Ext Ref In from rear panel to A11
Reference Assy P1
W24 W24 Cable, semi-rigid, A21 SLODA to A12 Synthesizer
W44 W44 Cable (9), coax, IF IN from front-panel to A10 3rd
Converter J3 (Option AYZ)
A12W2 A12W2 Cable, MMCX coax, 600 MHz Ref (325 mm)
Chapter 10
Replaceable Parts Lists and Locations
Hardware
Agilent Part
Number
E4406-60139
8120-5022
8120-5021
8120-5053
8121-0153
8121-0153
E4440-20084
8120-5022
E4440-60371
E4440-60372
8121-0149
8121-0156
8120-5053
8120-5053
E4440-20082
E4440-60374
8121-0151
283