Agilent Technologies PSA Series Service Manual page 299

Item Description
1 Screw M3x0.5 8mm-LG
(Crest Washer-Pan Head-TORX)
3 W47 Cable (97), coax, Preselector Tune Out
A13 Front End Driver to Rear Panel
4 Dress Panel, rear
5 W22 Cable (70), coax, Ext Ref In from rear
panel to A11 Reference Assy P1
6 W21 Cable (90), coax, 10 MHz Out from A11
Reference Assy P2 to rear panel
7 W19 Cable (40), coax 321.4 MHz IF OUT
from A10 3rd Converter J4 to rear panel
8 W14 Cable (30), coax, TRIGGER 2 OUT to
A9 2nd LO, J11
9 W13 Cable (20), coax, TRIGGER 1 OUT to
A9 2nd LO, J12
10 W12 Cable (6), coax, TRIGGER IN from
rear panel to A8 Analog IF, P4
11 Screwlock, SCSI
12 Dress Panel,
12 Cover plate, rear panel, USB/Flash Board
(Option 111, 115)
13 Rear Frame Assy. (includes EMI gaskets)
14 Deck Assy. (chassis)
15 W75 Cable (41), coax, 70 MHz IF OUT, from
A33 Option card J2 to rear panel (Option
H70)
16 W23 Cable, coax, 28V to rear panel from
A13 Front End Driver
Chapter 10
SCSI, shown in Figure 10-32
Replaceable Parts Lists and Locations
Hardware
Agilent Part
Number
0515-0372
8121-0153
E4440-00059
8120-5053
8120-5053
8121-0149
8121-0153
8121-0153
8120-5053
1252-5828
E4406-00017
E4440-00061
E4406-60154
E4440-00028
8121-0705
8121-0958
299