Agilent Technologies PSA Series Service Manual page 277

Reference Description
Designator
W7 W7 Cable, semi-rigid, For standard 2.4mm RF Input to A14
Attenuator
W8 W8 Cable, semi-rigid (with ferrites), A14 attenuator to A15
attenuator
W15 W15 Cable, semi-rigid, A9 2nd LO, J10 to Lowband, J5
W18 W18 Cable (7), coax (with ferrites), 321.4 MHz A20 Lowband
assy to A10 3rd Converter J2
W20 W20 Cable (50), coax, 50 MHz Cal signal from A10 3rd
Converter J7 to A14 Attenuator
W24 W24 Cable, semi-rigid, A21 FELOMA to A12 Synthesizer
W33 W33 Cable, semi-rigid, A15 Attenuator to W34
W34 W34 Cable, semi-rigid, W33 to A19 SBTX/RYTHM
W35 W35 Cable, semi-rigid, YTO Output A18 YTO to A21 FELOMA
W36 W36 Cable, semi-rigid, A19 SBTX/RYTHM to FL1 Low Pass
Filter (except Option B7J)
W37 W37 Cable, semi-rigid, FL1 Low Pass Filter to A20 Lowband
Assy. J1 (except Option 1DS)
W38 W38 Cable, semi-rigid, LO signal A21 FELOMA to A19
SBTX/RYTHM
W39 W39 Cable, semi-rigid, Bandpass Filter Output, 3.9 MHz
Bandpass Filter to A20 Lowband J4
W41 W41 Cable, semi-rigid, A21 FELOMA to A20 Lowband Assy.
W43 W43 Cable, semi-rigid, AT1 to FELOMA J2 (SBTX)
W54 W54 Cable, semi-rigid, A20 Lowband J3 to FIFA middle
connector
W55 W55 Cable, semi-rigid, A19 SBTX to FIFA rear connector
W56 W56 Cable, semi-rigid, FIFA to FL2 Band Pass filter
Chapter 10
Replaceable Parts Lists and Locations
Hardware
Agilent Part
Number
E4446-20020
E4446-20021
E4440-20084
E4440-60372
8121-0156
E4446-20036
E4446-20022
E4446-20023
E4446-20033
E4446-20031
E4446-20037
E4446-20030
E4446-20058
E4446-20034
E4446-20049
E4446-20044
E4446-20045
E4446-20046
277