Agilent Technologies PSA Series Service Manual page 31

Table 1-3 Required Test Equipment for PSA Series (Continued)
Instrument
3.5 mm (f) to 3.5 mm (f)
(2 Required)
3.5 mm (m) to 3.5 mm (m)
(2 Required)
3.5 mm (f) to 3.5 mm (f)
2.4 mm (f) to 3.5 mm (m)
(for E4446A, 47A, 48A)
3.5 mm (f) to Type-N (f)
3.5 mm (f) to 2.4 mm (f)
(for E4446A, 47A, 48A)
BNC (m) to SMA(f)
Type-N (m) to 3.5 mm (f)
(2 Required,
Opt. BAB 3 Required)
Type-N (f) to 2.4 mm (f)
Type-N (m)
to 2.4 mm (f)
(for E4446A, 47A, 48A)
Type-N (f) to 3.5 mm (m)
BNC Tee (BNC f,m,f)
SMB (f) to BNC (f)
BNC (f) to SMA (m)
BNC (f) to Dual Banana
3.5 mm (f) to Type-N (m)
2.4 mm (f) to Type-N (m)
Optional Equipment
10 MHz Distribution
Amplifier
(only needed when using
the 10 MHz Distribution
Amplifier setup)
a. A = Adjustments, P = Performance Testing, T = Troubleshooting)
Chapter 1
Critical Specifications
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.05:1
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.12:1
Frequency: DC to 34 GHz
VSWR: 1.15:1
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.05:1
Frequency: DC to 18 GHz
VSWR: 1.08:1
Frequency: DC to 26.5 GHz
VSWR: 1.05:1
Frequency: DC to 1.3 GHz
VSWR: ≤ 1.13:1
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
Frequency: DC to 18 GHz
VSWR: 1.08:1
Frequency: DC to 18 GHz
VSWR: ≤ 1.14:1
Frequency: DC to 1.3 GHz
Frequency: DC to 1.3 GHz
Shipped with the 8485 for adapting to the Power
Reference. Only to be used for power sensor
calibration.
Shipped with the 8487 for adapting to the Power
Reference. Only to be used for power sensor
calibration.
Service Equipment You Will Need
Recommended Alternative
Agilent Model Agilent Model
Number Number
83059B 1250-1749
1250-1748
1250-1749
11901D
1250-1745
11901B
1250-1700
1250-1744
11903B
11903D
1250-1750
1250-0781
1250-1236
1250-1200
1251-2277
08485-60005
08487-60001
Symmetricom Agilent 5087A
5087B
Overview
a
Use
P
P
P
A, P
A, P
P
P
P
A, P
P
A, P
A, P
A, P
A, P
A, P
A, P
A, P
A, P
31