Before Starting; Test Equipment You Will Need - Agilent Technologies PSA Series Service Manual

Before Starting

There are four things you should do before starting any of the
procedures listed or described in this chapter:
❏ Familiarize yourself with the safety symbols marked on the unit
under test (UUT), and read the general safety considerations and
the safety note definitions in the front of this guide, before you
begin the procedures in this chapter.
❏ Check that the UUT has been turned on and allowed to warm up.
❏ Ensure that the UUT is operating within a temperature range of
20 °C to 30 °C.
❏ Read the rest of this section.

Test equipment you will need

Refer to Table 1-3 on page
critical test equipment specifications for the performance verification
and adjustments.
Chapter 12
24, for a list of recommended equipment and
Post-Repair Procedures
Before Starting
411