Agilent Technologies PSA Series Service Manual page 263

This table corresponds to
Reference Description
Designator
1 J1 Input Connector, 3.5 mm (m) (Option BAB)
2 1st LO OUT connector SMA (Option AYZ)
3 IF INPUT connector SMA (Option AYZ)
A22 A22 Preamp Assembly (Option 1DS)
A27 A27 Electronic Attenuator (Option B7J)
FL2 FL2 Band Pass Filter, 3.900 GHz (Option 122 or 140)
FL3 FL3 Low Pass Filter, 4.4 GHz (Option 122 or 140)
W7 W7 Cable, semi-rigid, For Option BAB 3.5 APC RF Input to
A14 Attenuator
W45 W45 Cable, semi-rigid, LO OUT from front-panel to W46
(Option AYZ)
W46 W46 Cable, semi-rigid, LO OUT extension cable from A21
SLODA 1st LO OUT to W45. (Option AYZ, for PSA ≤ 26.5 GHz)
W48 W48 Cable, semi-rigid, FL1 Low Pass Filter to A22 Preamp
Assy. (Option 1DS)
W50 W50 Cable, semi-rigid, Preamp Out from A22 Preamp to
Lowband (Option 1DS)
W51 W51 Cable, semi-rigid, A19 SBTX/RYTHM out to A27
Electronic Attenuator (Option B7J)
W52 W52 Cable, semi-rigid, A27 electronic attenuator to FL1, 3 GHz
Low Pass Filter (Option B7J)
W78 W78 Cable, semi-rigid, FL2 to FL3 (Option 122 or 140)
W79 W79 Cable, semi-rigid, FL3 to A20 Lowband (Option 122 or
140)
W88 W88 Cable, semi-rigid, SLODA LO Out to cable W83 Mixer LO
In (Option 123)
Chapter 10
Replaceable Parts Lists and Locations
Figure 10-9 and Figure
Hardware
10-10.
Agilent Part
Number
08673-60040
1250-1666
1250-1666
E4440-60444
E4440-60456
0955-1391
0955-0519
E4440-20099
E4440-20095
E4440-20087
E4440-20072
E4440-20079
E4440-20110
E4440-20109
E4446-20047
E4446-20048
E4440-20087
263