Exterior Controls; Cab Protection (Rops And Fops) - Case CX490D Operator's Manual

Exterior controls

Cab protection (ROPS and FOPS)

DANGER
Crushing hazard!
Do not change the Roll Over Protective Structure (ROPS) in any way. Unauthorized changes such as
welding, drilling, or cutting will weaken the ROPS and decrease your protection. Have an authorized
dealer replace the ROPS if damage of any kind occurs. DO NOT TRY TO REPAIR THE ROPS.
Failure to comply will result in death or serious injury.
WARNING
Roll-over hazard!
After an accident, fire, tip over, or roll over, a qualified technician MUST replace the Roll-Over Protec-
tive Structure (ROPS) before returning the machine to the field or job site operation.
Failure to comply could result in death or serious injury.
This machine is equipped with a cab Roll-Over Protective
Structure (ROPS).
NOTICE: If the cab's ROPS (guaranteed high-strength
member) is damaged, replace the cab. When replacing
the cab, check the parts list for the part number of the cab
appropriate for the model. If the wrong cab is mounted,
the cab could be damaged when the machine rolls over,
which could result in the death or serious injury to the op-
erator or damage to the machine.
This machine is equipped with a Cab Falling Object Pro-
tective Structure ( FOPS ) compliant to Level 1 as defined
by ISO 10262.
Level 1 is intended for protection from small objects, e.g.
small rocks, small debris and other small objects encoun-
tered in operations such as highway maintenance, land-
scaping and other construction site services.
3 - CONTROLS AND INSTRUMENTS
3-60
D0037A
W0134A
1
SMIL15CEX1339AA
2
SMIL13CEX2662AB