Table of Contents
Advertisement
(1) Cigarette lighter and 24 V power supply socket: the
device is active with the starter key in ON position, or
while the engine is running.
To operate the cigarette lighter, push it down to engage
its heating position.
NOTICE: keep pushing the cigarette lighter can cause se-
rious damages to the device and to the machine electrical
system.
NOTICE: the electrical system may be damaged if the
cigarette lighter does not return to its original position af-
ter 30 s. Pull it out manually and consult the CASE CON-
STRUCTION dealer.
NOTICE: connect only 24 V devices to the socket. Con-
necting devices functioning at different voltage can cause
damages to the device itself and to the electrical system.
(2) Storage tray.
(3) Ashtray.
(4) Horn volume lowering switch: the horn volume lower-
ing switch allows to change the volume of the horn. Press
3 - CONTROLS AND INSTRUMENTS
SMIL15CEXY840EA
the ON side of the switch to lower the volume of the horn.
Press the OFF side of the switch to resume the normal
volume of the horn.
(5) 12 V power supply socket: the device is active with the
starter key in ON position, or while the engine is running.
NOTICE: connect only 12 V devices to the socket. Con-
necting devices functioning at different voltage can cause
damages to the device itself and to the electrical system.
(6) Hydraulic quick coupling system activation switch (op-
tional, refer to Chapter 9).
(7) Around lighting switch (optional): the around lighting
switch allows to activate the around lighting system in-
stalled on the cameras. Press the back side of the switch
to activate the lighting. Press the front side of the switch
to deactivate the lighting.
NOTE: the around lighting system activates as the work-
ing lights are turned on.
3-24
3
Advertisement
Table of Contents
