Bulb Replacement - Case CX490D Operator's Manual

Bulb replacement

Lighting in the operator compartment:
1. Remove the cover.
2. Remove the light bulb, then install a new light bulb
of the same wattage ( 10 W ).
3. Install the cover.
Attachment working lights:
1. Remove the 4 retaining screws.
2. Tilt the working light and disconnect the plug.
3. Pull the clip outwards, remove the bulb and install a
bulb of the same wattage ( 70 W ).
4. Install the clip and reconnect the plug.
5. Put the working light back into position and install
the mounting screws.
NOTICE: never put your fingers on a tungsten iodide bulb.
6 - MAINTENANCE
6-78
1
8YHY9K-001A
2
SMIL13CEX2830AB
3
SMIL13CEX2831AB
4
SMIL13CEX2832AB