Table of Contents
Advertisement
7. Start the engine. Press the attachment selector button
(A) until the breaker icon (B) featuring the required
flow rate/pressure combination (1 to 5) appears on the
top left of the display. If a different setting is necessary,
or in case of forgotten settings, refer to the Operational
settings paragraph previously in this Section.
NOTICE: If operation with the hydraulic attachment
is attempted without making any setting, a warning
buzzer sounds and the message AUXILIARY SET UP
REQUIRED is displayed.
8.
Select the SP work mode.
9.
Set the gate lock lever in forward position.
10. Operate the controls of boom, arm and bucket in or-
der to position the breaker right to the structure or to
the object to be crushed.
9 - ACCESSORIES
9-20
17
SMIL15CEX1234AA
18
SMIL15CEXZ405AB
19
SMIL19CEX0563AA
Advertisement
Table of Contents
