Case CX490D Operator's Manual page 58

Seat belt
WARNING
Equipment failure could cause accident or in-
jury!
Always fasten the seat belt securely before
you operate the machine. Inspect seat belt
parts for wear and damage. Replace any and
all worn or damaged parts of the seat belt prior
to operation.
Failure to comply could result in death or se-
rious injury.
• Sit comfortably on the operator's seat.
• Pull out a long section of belt.
• Engage the belt in the fastening system (9).
NOTE: if the section of belt pulled out is not long enough,
release it, so it rolls up and then pull it out again.
To release the seat belt press down the releasing lever of
the fastening system (9).
NOTICE: the seat belt must be kept clean. Use only soap
and water to clean the belt, do not use bleach or dyes.
3 - CONTROLS AND INSTRUMENTS
W0046C
3-6
11
SMIL14CEX1664AB