Case CX490D Operator's Manual page 341

CASE CONSTRUCTION quick coupler (CX500D)
CASE CONSTRUCTION can provide a hydraulic quick coupler and a dedicated range of Coupler buckets.
The CASE CONSTRUCTION Coupler buckets are designed to optimize the fitting to the CASE CONSTRUCTION
quick coupler, and are designed to optimize the operating performance of the CASE CONSTRUCTION excavators in
most of construction works.
Main dimensions
(E)
(G)
(H)
Weight
NOTICE: usage of buckets other than CASE CONSTRUCTION Coupler buckets is strictly limited to the condition that
the bucket hangers match with the dimensions indicated in the table below. Contact your CASE CONSTRUCTION
dealer for checking the buckets intended for usage.
Bucket fitting dimensions
Bucket pin diameter
Minimum pin spread (A)
Maximum pin spread (B)
Seating width (F)
Quick coupler identification plate
The identification plate of the CASE CONSTRUCTION quick coupler is located on the inside of the top hangers.
Serial number:
Weight:
Working pressure:
Type/Model:
Part number:
Year of manufacture:
SWL (Safe Working Load):
9 - ACCESSORIES
2
SMIL15CEX3064EA
481 mm (18.9 in)
625 mm (24.6 in)
775 mm (30.5 in)
900 kg (1984 lb)
100 mm (3.9 in)
537 mm (21.1 in)
630 mm (24.8 in)
440 mm (17.3 in)
9-35
110 mm (4.3 in)
542 mm (21.3 in)
635 mm (25.0 in)