Case CX490D Operator's Manual page 87

Idle mode button
The idle setting cycles as follows every time the idle mode
button is pressed.
Auto idle
• If any lever or pedal is not operated for 5 s, the engine
speed drops automatically to low idle. To restore the
engine speed, operate any control levers, or turn the
engine speed throttle.
Idle shutdown
• If the engine speed is kept at 1200 RPM or below and
the gate lock lever is kept in central position for 3 min,
the message IDLE SHUT DOWN is displayed, an alarm
sounds, and the engine stops automatically 10 s there-
after.
Auto idle and Idle shutdown
• Auto idle activates as described before, and if the gate
lock lever is also set to the central position, idle shut-
down eventually activates after 3 min.
NOTICE: to protect the engine, let idle continue for at least
3 min.
NOTE: to restart the engine that has stopped by idle shut-
down, turn the starter key to OFF position and then start
the engine.
The idle mode currently selected is indicated by a specific
icon on the display:
Only auto idle is selected.
Only idle shutdown is selected.
Sequence of auto idle and idle shutdown is
selected
3 - CONTROLS AND INSTRUMENTS
3-35
9
SMIL14CEX1713BA