Left mirror (A)
The mirror shall be installed as shown in the picture.
The dimension (L) is 170 mm (6.7 in).
The tightening torque of the bolt (1) is 71.6 – 91.2 N·m
(52.8 – 67.3 lb ft).
The mirror shall be positioned so that the side on the rear
left of the machine shall be visible.
NOTICE: After installing and positioning all the mirrors,
the visibility around the machine shall be checked from the
operator's seat. Set the seat into the desired position, and
make sure to confirm all the reference views in the mirrors.
If necessary, fine tune the positioning of the mirrors in
order to ensure proper visibility around the machine.
3 - CONTROLS AND INSTRUMENTS
3-63
3
SMIL14CEX2578AB
4
SMIL14CEX2579AA