Counterweight Removal System - Case CX490D Operator's Manual

Crawler excavator
Hide thumbs Also See for CX490D:
Table of Contents

Advertisement

Counterweight removal system

WARNING
Hazard to bystanders!
ALWAYS make sure the work area is clear of bystanders and domestic animals before starting this
procedure. Know the full area of movement of the machine. Do not permit anyone to enter the area
of movement during this procedure.
Failure to comply could result in death or serious injury.
WARNING
Heavy object!
Clear the area around and under the counterweight removal and installation system before installing
or removing counterweights. Keep all unauthorized personnel clear of the area. Make sure all lifting
devices are in good condition and capable of handling the counterweight mass.
Failure to comply could result in death or serious injury.
Localization of the control of counterweight removal system
The machine can be equipped with a system that allows an automatic handling of the counterweight in order to remove
and install it without need of external lifting equipments.
The main controls to operate the automatic counterweight removal system are located in the rear right-hand compart-
ment.
1. Counterweight removal controller
2. Stop valve
NOTICE: Improper use of the counterweight removal system can cause serious damage to the machine and to anyone
near the machine.
9 - ACCESSORIES
1
SMIL20CEX1343EA
9-49
W0245A
W0037A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx500d

Table of Contents