Table of Contents
Advertisement
In the FVM mode, the hour meter, the gauges, the icons, and the warnings related to the functioning of the machine are
shown on the left side of the display. The fuel economy gauge, the clock, and the messages related to the functioning
of the machine are shown on the top of the display.
The FVM visualization is centered right above the machine, and provides a bird's eye type view of the area around
the machine along with a panoramic view of the surroundings.
A. Around view area (light gray background)
B. Panoramic view strip
NOTE: The zones (E) where the view of the rear camera is combined with the views of the side cameras are affected
by a slight distortion of the image due to the matching process of the single views.
A guideline is displayed on the around view area to set a
reference for the periphery of the machine.
The distance from the side of the upperframe up to the
guideline (L1) is 2.5 m (98.4 in).
The distance from the counterweight up to the guideline
(L2) is 2.5 m (98.4 in).
NOTICE: The FVM system does not ensure visibility on
the closest area around the machine.
30 cm (11.8 in) of the machine periphery is not covered
by the cameras (dark grey background). Make sure to
check the closest area around the machine by the direct
view or through the mirrors.
9 - ACCESSORIES
3
SMIL17CEX1336FA
C. Machine Periphery Guideline
D. Camera position monitor
Approximately
9-46
4
SMIL17CEX1339AA
Advertisement
Table of Contents
