Table of Contents
Advertisement
3 - CONTROLS AND INSTRUMENTS
Operating mode
The machine is default equipped with a rear external camera. The operating mode of the display (1) shows the view
of the rear camera (R) and an information band (I) that includes the icons and the warnings related to the functioning
of the machine.
The machine can be optionally equipped with an additional right-side external camera. A supplementary operating
mode of the display (2) shows both the view of the rear camera (R) and the view of the right-side camera (S). The
icons and the warnings related to the functioning of the machine are shown on the top of the display.
Press the camera view selector button (7) on the instrument cluster to select the operating mode (1) or the operating
mode (2). The operating mode of the display toggles every time the button is pressed.
NOTE: The default sequence of the operating modes of the display starts from the operating mode (1). Consult the
CASE CONSTRUCTION dealer for setting a different sequence of the operating modes of the display.
NOTE: If the machine is equipped with the Field View Monitor system, an alternative operating mode of the display
can be selected. Refer to Chapter 9.
4
SMIL15CEXY894FB
NOTICE: During machine operation, make sure to select either one operating mode of the display in order to ensure
proper visibility around the machine.
3-28
Advertisement
Table of Contents
