Case CX490D Operator's Manual page 100

Machine status
Detailed machine conditions can be
checked.
The following items can be checked:
page
ENGINE SPEED (min-1)
P1 PRESS. (MPa)
P2 PRESS. (MPa)
1/3
BATTERY VOLT. (V)
ENGINE PROTECTION FEATURE
ALTITUDE COMPENSATION
ACCUMULATED FUEL
CONSUMPTION (L)
ACCUMULATED DEF CONSUMP-
2/3
TION (L)
COOLING DOWN REMAINING TIME
(sec)
ENGINE OPERATION TIME (hr)
MACHINE OPERATION TIME (hr)
SWING OPERATION TIME (hr)
3/3
TRAVEL OPERATION TIME (hr)
BREAKER OPERATION TIME (hr)
CRUSHER OPERATION TIME (hr)
NOTE: press and hold the left and right buttons together
for 10 s, and the entire fuel history will be reset.
Engine protection feature: the machine monitors its en-
gine operation and, in case excessive load is applied, con-
trols the engine output for protection. "++++" indicates
that this function has been activated, "----", not activated.
Altitude compensation: the machine is equipped with
barometric sensor and, under the condition of extremely
low atmospheric pressure (ex. high altitude area), op-
timize the engine operation. "++++" indicates that this
function has been activated, "----", not activated.
3 - CONTROLS AND INSTRUMENTS
Machine information
3-48
33
SMIL15CEX0456AA