Case CX490D Operator's Manual page 92

Engine coolant temperature gauge
The number of lit segments indicates the temperature of
the engine coolant. The greater the number of lit seg-
ments, the higher the coolant temperature is.
If all segments are lit, an alarm sounds and the OVER
HEAT message is displayed.
If the OVER HEAT message appears, lower the engine
speed. If the temperature does not drop, stop the engine,
remove the starter key, and call the CASE CONSTRUC-
TION dealer for machine inspection.
Fuel gauge
The number of lit segments indicates the remaining level
of fuel. If all segments are lit, the fuel tank is full.
If only one segment is lit, an alarm sounds and the LOW
FUEL message is displayed.
If the LOW FUEL message appears, stop machine oper-
ation, stop the engine, and add fuel to the fuel tank.
3 - CONTROLS AND INSTRUMENTS
3-40
20
SMIL14CEX1714AA
21
SMIL14CEX1715AA
22
SMIL14CEX1720AA
23
SMIL14CEX1721AA