Case CX490D Operator's Manual page 88

Hour meter button
Hour meter
• The hour meter indicates the total engine operating
hours in units of 0.1 h ( 6 min ). The hour meter cannot
be reset.
Trip meter
• The trip meter allows to set a partial operating hour
counter, which can be reset to 0 h at any time. The
hours are indicated in units of 0.1 h ( 6 min ).
To reset the trip meter press and hold the hour meter but-
ton while the trip meter is displayed. The displayed engine
operating hours will be reset to 0 h.
The hour meter is displayed by default. To display the trip
meter, press the hour meter button: the trip meter will be
thus displayed for approximately 1 min, after which the
hour meter will be displayed again.
NOTE: the display disappears when the starter key is
turned to OFF position. The hour meter can be anyway
displayed for 20 s by pressing the hour meter button.
3 - CONTROLS AND INSTRUMENTS
3-36
10
SMIL14CEX1717AA
11
SMIL14CEX1718AA
12
SMIL14CEX1719AA