Case CX490D Operator's Manual page 153

3 - CONTROLS AND INSTRUMENTS
OUTPUT REDUCTION CANCEL
The OUTPUT REDUCTION CANCEL function allows to temporarily override the engine derating condition in the step
C of the inducement sequence.
The function overrides the engine derate for 30 min maximum, and is mainly intended to address dangerous situa-
tions.
To activate the OUTPUT REDUCTION CANCEL function, access the user information mode of the display and select
the SCR CONFIGURATION tab: set OUTPUT REDUCTION CANCEL to ON.
NOTICE: The OUTPUT REDUCTION CANCEL function cannot be activated in the step D of the inducement se-
quence.
Resuming the operating mode of the display, the ESCAPE MODE warning and the message OUTPUT REDUCTION
CANCELED are displayed.
30
SMIL20CEX0694FA
Operate the machine in order to reach a safe condition within 30 min. Stop the engine, and make sure to take the
appropriate action required by the inducement sequence, as for example refilling DEF/AdBlue® or repairing the SCR
system.
If the operation is continued for more than 30 min, the engine is derated again, and the step C of the inducement
sequence is restored.
3-101