Case CX490D Operator's Manual page 91

Camera view selector button
The operating mode of the display cycles as follows every
time the camera view selector button is pressed.
(1) Rear camera view operating mode.
(2) Rear camera view and right-side camera view oper-
ating mode.
(3) Field View Monitor bird's eye view operating mode.
NOTE: The operating mode (2) can be selected only if
the optional right-side camera is equipped. The operating
mode (3) can be selected only if the optional Field View
Monitor system is equipped.
NOTE: The default sequence of the operating modes of
the display starts from the operating mode (1). Consult
the CASE CONSTRUCTION Dealer for setting a different
sequence of the operating modes of the display.
NOTICE: During machine operation, make sure to select
either one operating mode of the display in order to ensure
proper visibility around the machine.
3 - CONTROLS AND INSTRUMENTS
3-39
18
SMIL14CEX1729AA
19
SMIL17CEX3235BA