Field View Monitor - Case CX490D Operator's Manual

Field view monitor

The CASE CONSTRUCTION Field View Monitor (FVM) is a system that ensure proper visibility during operation by
displaying a comprehensive visualization of the area around the machine.
The comprehensive visualization is based on the combi-
nation of the views of three external cameras: a rear cam-
era (1) installed on the counterweight, a right-side cam-
era (2) installed above the rear right-hand door, a left-side
camera (3) installed above the rear left-hand door.
NOTICE: Never operate the machine while only looking
at the images on the display. Make sure to check the
area around the machine by the direct view or through
the mirrors.
NOTICE: If any mud, raindrops, snow, etc. are adhered
to the camera lens, the images on the display are deteri-
orated. Wipe away dirt with a wet and soft cloth, and then
wipe it with a dry and soft cloth. Make sure not to scratch
the cameras.
FVM mode of the display
The FVM mode of the display is alternative to the other
operating modes. The operating mode of the display
cycles as follows every time the camera view selector
button is pressed.
(1) Rear camera view operating mode.
(2) Rear camera view and right-side camera view oper-
ating mode.
(3) FVM view operating mode.
NOTICE: During machine operation, make sure to se-
lect either one operating mode of the display in order to
ensure proper visibility around the machine. If the dis-
play is switched to the user information mode during ma-
chine operation, the warning message SELECT CAMERA
SCREEN DURING OPERATION will appear on the top of
the display.
9 - ACCESSORIES
9-45
1
SMIL19CEX1990AA
2
SMIL17CEX3235BA