Table of Contents
Advertisement
Exterior controls
Cab protection (ROPS and FOPS)
DANGER
Crushing hazard!
Do not change the Roll Over Protective Structure (ROPS) in any way. Unauthorized changes such as
welding, drilling, or cutting will weaken the ROPS and decrease your protection. Have an authorized
dealer replace the ROPS if damage of any kind occurs. DO NOT TRY TO REPAIR THE ROPS.
Failure to comply will result in death or serious injury.
WARNING
Roll-over hazard!
After an accident, fire, tip over, or roll over, a qualified technician MUST replace the Roll-Over Protec-
tive Structure (ROPS) before returning the machine to the field or job site operation.
Failure to comply could result in death or serious injury.
This machine is equipped with a cab Roll-Over Protective
Structure (ROPS).
NOTICE: If the cab's ROPS (guaranteed high-strength
member) is damaged, replace the cab. When replacing
the cab, check the parts list for the part number of the cab
appropriate for the model. If the wrong cab is mounted,
the cab could be damaged when the machine rolls over,
which could result in the death or serious injury to the op-
erator or damage to the machine.
3 - CONTROLS AND INSTRUMENTS
3-50
D0037A
W0134A
1
SMIL15CEX1339AA
2
SMIL17CEX5115AA
Advertisement
Table of Contents
