Left-Hand Side Controls - Case CX490D Operator's Manual

Left-hand side controls

Left-hand side controls
(1) Arm angle adjustment lever: the lever enables the
control arm to be adjusted in different inclines in accor-
dance with the operator's body profile. Hold the lever and
select the desired position, and then release the lever.
NOTE: stop the engine before adjusting the control arm.
(2) Gate lock lever.
(3) Safety bar.
(4) Horn button.
NOTICE: make sure to sound the horn before starting the
engine and resuming machine operation.
(5) Storage tray.
(6) Not active.
(7) Radio mute button: the radio mute button is located
underneath the control lever. Push the button to mute the
volume. Push it again to resume the volume.
(8) Control of heating, ventilation or air conditioning.
3 - CONTROLS AND INSTRUMENTS
SMIL15CEXY927EB
(9) Emergency stop switch (Refer to Chapter 4).
(10) Free swing button: the button sets the condition of
swing stop. If the free swing is activated the swing stop
is delayed. Press the button to activate the free swing
function. The free swing icon appears on the monitor.
Press the button again to deactivate the function.
The free swing function is intended to be used especially
for load handling application to avoid loads from slinging.
The free swing function is automatically disabled when
stopping the engine.
NOTICE: avoid working on a slope with the free swing
function active. The swing becomes hard to stop.
NOTICE: when parking on a slope, never activate the free
swing function from the machine parking position. The
machine may start to swing because the swing parking
brake is released.
(11) Fan reversing button (Refer to Chapter 4).
3-14
1