20. Remove the clips (6) on the lifting bracket of the coun-
terweight.
21. Remove the pins (7).
22. Take the wire ropes (8) out from the brackets.
23. Reinstall the pins (7) to the brackets by means of the
clips (6).
24. Get onto the cab, start the engine, and make sure
that the gate lock lever is in central position.
25. Set the engine speed 4 - 5 steps above low idle.
26. Reach the rear right-hand compartment.
27. Turn the CTWT POSITION switch (4) to LOWER po-
sition until the lifting cylinders are fully retracted.
28. Turn the ARM POSITION switch (5) to TOP position
to raise the arm until it stands vertical into its com-
partment on the upper frame.
9 - ACCESSORIES
9-52
8
SMIL20CEX1354BA
9
SMIL20CEX1355BA