Table of Contents
Advertisement
Press the display mode selector button (D) to confirm the
selected combination. Resume the operating mode of the
display, and press the attachment selector button (A).
If the display is set either to the rear camera view oper-
ating mode or to the Field View Monitor bird's eye view
operating mode, an icon on the top of the display indi-
cates the type of attachment (breaker or crusher) and the
storing number (1 to 5) of the flow rate/ pressure combi-
nation currently in use. The pump setting (single or twin)
and the values of maximum flow rate and working pres-
sure currently in use are displayed above the hour meter.
If the display is set to the rear and right-side camera view
operating mode, the attachment icon, the pump setting
and the values of the flow rate/pressure combination cur-
rently in use are displayed as shown in the picture.
Operating Controls
Use the ON/OFF button (1) located on the right-hand con-
trol lever to operate a single-acting hydraulic attachment
with a continuous flow.
9 - ACCESSORIES
9-12
7
SMIL15CEX1234AA
8
SMIL15CEXZ405AB
9
SMIL15CEXZ406AB
10
SMIL15CEXZ396AB
Advertisement
Table of Contents
